Decal Application Instructions

Our decals are made from premium grade polymeric calendared coloured vinyl, with an outdoor durability of up to 7 years. 

Excessive heat/cold can affect the adhesive. For the best results, especially for outdoor decals such as on car windows, we recommend applying your decal on a warm, dry day. 

Once the decal has been applied, we recommend leaving the decal for 72 hours before washing to allow the decal to cure to the surface. 

Care Instructions for decals once applied; gentle hand wash only, do not soak, not microwave or dishwasher safe. 

APPLICATION INSTRUCTIONS

Step 1
Choose your surface. (a range of surfaces can be used, we recommend smooth and flat surfaces) 

Step 2 
Clean the surface. Use alcohol rub or mild soap and water to thoroughly clean the surface, then dry the area using a microfibre cloth to ensure no lint or dust specks are left on the surface

Step 3 
Prepare your decal. Place decal upside down and rub a squeegee or credit card firmly across the backing of the decal to prepare it for application. This ensures that the decal will stick to the transfer tape and removes any air bubbles. 

Step 4 
Peel the backing paper slowly off of the decal. If the sticker clings to the backing, slowly replace the backing paper and rub firmly before peeling paper again. 

Tip: Peel backing paper back over itself instead of straight up in the air, then you can use your thumb to press the decal as you peel it back

Step 5 
Once the backing has been removed, the sticky side of the decal will be revealed. Slowly lower the decal onto your surface (sticky side down, transfer tape to the top), use the squeegee or credit card to firmly press the decal into place

Step 6 
Slowly peel the clear transfer tape off, leaving the decal on the surface.

Finished!